MAA Find an attorney
State lawsGuidesInjuriesInsuranceArticlesFAQAboutFind an attorney

Helmet safety: standards, fit and state law

What the federal helmet standard tests, how to spot a novelty helmet, how to fit one, and what to do with a helmet after a crash.

Updated November 10, 2026By the editorial desk5 min read
Illustration for Helmet safety: standards, fit and state law
AI-generated illustration.

The federal standard in brief

Every helmet sold in the United States for use on a motorcycle must meet Federal Motor Vehicle Safety Standard No. 218. Its stated purpose is to reduce deaths and injuries to motorcyclists from head impacts. The full text is FMVSS No. 218, in Title 49 of the Code of Federal Regulations.

What the standard tests

  • Impact attenuation. The helmet is dropped onto flat and rounded steel anvils at four sites, twice at each. Peak acceleration of the test headform must not exceed 400g, and there are limits on how long it may stay above 200g and 150g.
  • Penetration. A pointed striker is dropped from about 3 meters. It must not touch the headform inside the helmet.
  • Retention. The chin strap system is loaded with 50 pounds and then a further 250 pounds for two minutes. It must hold without separating and without stretching more than one inch.
  • Peripheral vision. The helmet must leave at least 105 degrees of vision clear to each side.
  • Projections. Nothing rigid may project inside the shell, and outside projections are limited to 0.20 inch, about 5 millimeters.

The label

A compliant helmet has a certification label on the outside back with the manufacturer or brand, the model, the letters DOT, the words FMVSS No. 218 and the word CERTIFIED. Helmets certified before May 13, 2013 have a label that reads only DOT. A separate permanent label gives the manufacturer's name, the size, and the month and year of manufacture.

The government does not approve helmets before sale. Manufacturers certify their own products. The National Highway Traffic Safety Administration buys and tests samples, publishes the results, and can require a recall when a helmet fails, as the NHTSA helmet guidance explains.

How to spot a novelty helmet

Counterfeit DOT stickers are sold for helmets that do not meet the standard. The agency lists these checks:

  • Weight. Helmets that meet the standard generally weigh about three pounds. Unsafe helmets may weigh a pound or less.
  • Liner. Unsafe helmets are usually less than one inch thick and have no stiff foam inner liner.
  • Chin strap. Compliant helmets have sturdy straps with solid rivets. Plastic buckles that could snap are a warning sign.
  • Shape and claims. Be wary of very small skullcap designs, rigid spikes or decorations, and advertising such as the thinnest or lightest helmet available.

A novelty helmet does not satisfy a state helmet law, and in a claim it gives an insurer the same argument as wearing no helmet.

How to fit a helmet

  1. Find your head shape. Seen from above, heads are round oval, intermediate oval, which is the most common, or long oval. Helmets are built to match.
  2. Measure. Run a cloth tape around your head just above the eyebrows and around the thickest point at the back. Compare the figure with the maker's size chart.
  3. Check the fit. A correct helmet is a little tight, with even pressure all round and no painful points. It should not move when you shake your head.
  4. Read the pressure. Pressure on the forehead suggests the helmet is too round for you. Pressure at the sides suggests it is too oval.
  5. Wear it before you ride. The agency suggests wearing a new helmet for 30 to 45 minutes to find hot spots that do not show at first.
  6. Do not modify it. Use only the maker's cheek pads and liners. Other changes can void the warranty and weaken the helmet.

Types of helmet

Full-face helmets cover the chin and jaw. Modular helmets have a chin bar that lifts. Open-face, or three-quarter, helmets leave the face uncovered, and half helmets cover only the top of the head. All four types can meet the federal standard. The standard does not test chin bars, so compliance alone does not tell you how much of the face is protected.

After a crash

A helmet that has taken an impact has done its job once. The foam liner absorbs energy by crushing, and that damage may not be visible from outside, so manufacturers generally advise replacing a helmet after any crash. Before you replace it:

  • Keep the damaged helmet. Do not clean, repair or throw it away. It is evidence of where and how hard your head was struck.
  • Photograph it from every side, including the labels inside and on the back.
  • Keep the receipt or find the price. The helmet and other damaged gear are part of a property damage claim.
  • If the helmet failed in a way it should not have, such as a strap that separated, report it to the agency and keep it untouched. A defect claim against the maker may be possible. See the recall page.

Helmets and state law

17 states require a helmet for every rider, 30 require one for some riders, and Illinois, Iowa and New Hampshire have no helmet requirement. The full table is at helmet laws by state.

In 2023, 35% of motorcyclists killed were not wearing a helmet, based on known use. The share was 51% in states without a law covering all riders and 10% in states with one, according to the NHTSA 2023 motorcycle fact sheet. Observed use of compliant helmets was 73.8% nationally.

Helmets and injury claims

Not wearing a helmet rarely changes who caused a crash. It can affect the amount paid for a head or face injury, because an insurer may argue that part of the harm would have been avoided. How far that goes depends on the state. Read helmet laws and injury lawsuits and the guide to traumatic brain injuries.

Common questions

Is a helmet with a European or Snell label legal in the United States?

State helmet laws refer to the federal standard, so what matters for the law is the DOT certification label. Many helmets carry more than one certification. A helmet with only a foreign label and no DOT label may not satisfy a state law.

How do I check whether my helmet has been recalled?

Search the brand and model in the equipment section of the NHTSA recall page, or call the agency's vehicle safety hotline at 888-327-4236.

Does a passenger need the same kind of helmet?

Yes. The federal standard applies to the helmet, whoever wears it, and state helmet laws generally cover passengers as well as operators. Age rules are applied to each person separately, so a passenger may need a helmet when the operator does not. Fit matters as much for a passenger as for the rider, so a spare helmet in the wrong size is a poor substitute.

Does this site test or recommend helmets?

No. This page summarizes public standards and agency guidance. It does not review products.

This page is general information, not legal or medical advice.